Product List
TEXIO brand products
Dropper Type
Dropper Type
The DC voltage produced through a transformer and rectifier circuit is a system in which high pressure to an arbitrary voltage. It has the merit that ultra-low noise, but the demerit that heavy, Low efficiency .
-
PA-B Series Regulaterd Powersupply
-
● Low ripple, low noise
● Digital display of voltage and current at the same time
● Series/parallel operation
● Floating output/voltage remote sensing terminal
● External analog control
● Monitor output
● EIA rack size
● Option: GP-IB Adapter (GP-600B and OP-18-PAB)
● PA18-1.2B/PA18-2B/PA36-1.2B:without handle.With handle model:PA18-1.2BVT/PA18-2BVT/PA36-1.2BVT
-
Multi output Type
-
Multifunctional DC regulated power supply
-
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
● Equipped with electronic load function (CH1, CH2 / CC, CV, CR mode)
● Low noise/low ripple: ≦350μVrms/≦2mArms (for PDW32-3DG)
● Series/parallel tracking function (CH1-CH2)
● Output delay/output monitoring/output record function
● Protection function: OVP/OCP/OTP/OPP (when loading)
● Sequence function (CH1/CH2)
● Internal memory function (panel settings/sequence/output delay/output record)
● Power output from USB power supply port (3CH model)
● Remote sensing function (1CH model, 3CH model except PDW32-3TG)
● 4.3 inch color TFT LCD
● Standard interface: USB, RS-232C, GP-IB, LAN, external I/O
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
● Equipped with electronic load function (CH1, CH2 / CC, CV, CR mode)
● Low noise/low ripple: ≦350μVrms/≦2mArms (for PDW32-3DG)
● Series/parallel tracking function (CH1-CH2)
● Output delay/output monitoring/output record function
● Protection function: OVP/OCP/OTP/OPP (when loading)
● Sequence function (CH1/CH2)
● Internal memory function (panel settings/sequence/output delay/output record)
● Power output from USB power supply port (3CH model)
● Remote sensing function (1CH model, 3CH model except PDW32-3TG)
● 4.3 inch color TFT LCD
● Standard interface: USB, RS-232C, GP-IB, LAN, external I/O
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
-
-
PW-A Series Multi-Output Regulated DC Power Supplies
-
● One-Dial Control
All setting conditions are selected at the single rotary-encoder.
● Tracking
Output voltage and current value of positive and negative can be adjusted from zero at the same time by the absolute value tracking.
● 4-Point Pair Presetting of Voltage and Current Value
● ON/OFF Delay Time
Delay-time can be set in each output.
● Output Selection
On and off of each output can be selected and set besides the main output key.
● Key Lock
A key lock function provides to hold all setting values except for power switch.
● Limit & Status Key
The output voltage and current values can be confirmed by the limit-key. The trucking of each output and the condition of delay setting can be confirmed by the status-key.
● Various External Controls
ON/OFF of main output, PRESET 1 to 4 and alarm.
● Overheating Protection
● GP-IB, USB, RS-232C
GP-IB/USB interface(IF-41GU),USB interface(IF-41USB) and RS-232C(IF-41RS) provided as user option.
-
Programmable Electronic Load
-
LSG Series DC Electronic Loads
-
●175W/350W/1050W models and 2000W booster.
●LSG Series(150V type) ,LSG-H Series800V type).
●Operating Mode : C.V/C.C/C.R/C.P/C.C +C.V/C.R + C.V/C.P. + C.C.
●Sequence Function for High Efficient Load Simulations.
●Parallel Connection of Inputs for Higher Capacity. (With 4 Booster Units : Max 9.45kW or 4 Master Units)
●External Channel Control/Monitoring via Analog Control Connector.
●Program Mode to Create Work Routines for Repetitive Tests.
●Multiple-Interface : USB 2.0 Device/Host and RS-232C.
●Optional Interface : GP-IB and LAN
●Adjustable OPP/OCP/OVP Setting.
-
Multi-channel Electronic Load
-
Multi Channel Electronic Loads
-
● Multi-channel & individual control
Each channel is isolated and can be controlled individually.
● Low cost High performance
The CC and CR modes are standard. Addition to standard, CV and CP modes are lined up. Various models are available based on usage scenes.
● 4 points presetting
4 sets of frequently used value can be preset.
● Key lock
Key lock function provides to hold all setting values.
● Various remote controls (user option)
It is possible to add the interface function of GP-IB or USB after purchasing as user option.
● Front input terminal (1A/3A/7A models)
The terminal is provided by factory option. (Maximum input current is 30A.)
● Maximum 12 channel in full rack size
-
Basic Oscilloscope
-
DCS-1000B Series Digital Storage Oscilloscope
-
●100MHz/70MHz/50MHz Digital Storage Oscilloscope
●Waveform update rate up to 50,000wfms/s
●256 color gradient 7inches WVGA display
●10M memory depth per channel independently
●1M FFT mathematical sampling analysis mode
●Zoom In/Play and Pause Function
●Diversified Trigger Functions
●X-Y Mode Display
●Go/NoGo Function
●Data Log Function
●Digital Filter Function
●36 Measurement Parameter Selections
-
Middle class Oscilloscope
-
DCS-2000E Series Digital Storage Oscilloscope
-
●200MHz/100MHz/70MHz Digital Storage Oscilloscope
●Waveform update rate up to 120,000wfms/s
●256 color gradient 8inches WVGA display
●10M memory depth per channel independently
●1M FFT mathematical sampling analysis mode
●Zoom In/Play and Pause Function
●Diversified Trigger Functions
●X-Y Mode Display
●Go/NoGo Function
●Data Log Function
●Digital Filter Function
●36 Measurement Parameter Selections
-
2ch Function Generator
-
FGX-2220 2ch Arbitrary Function Generator
-
•DDS Function Generator series
•1μHz high frequency resolution maintained at full range
•20ppm frequency stability
•Arbitrary Waveform Capability
•Sine, Square, Ramp, Pulse, Noise, standard waveforms
•Internal and external LIN/LOG sweep with marker output
•Int/Ext AM, FM, PM, FSK, SUM modulation
•Burst function with internal and external triggers without marker output
•Store/recall 10 groups of setting memories
•Output overload protection
•USB interface as standard
•3.5 inch Color TFT LCD (320 X 240) graphical user interface
-
6 1/2digit DMM
-
DL-1060 Digital Multimeter
-
● High-speed sampling rate (50000 Rdgs/sec. at NPLC 0.001)
● Direct Thermocouple Measurement (Built-In Cold Junction to improve Accuracy)
● Dual Measurement & Dual Display (Including Thermocouple Measurement)
● Capacitance Measurement
● Several Measurements & Mathematic Functions
● Wide Range Current Measurement (Up to 10A)
● High Sensitivity(DCV: 0.1μV & Resistans: 100μΩ)
● Plug & Play Interface: Built-in USB (USBTMC)
● High Storage Memory (Up to 2000 Readings)
● Free Application Software
-
-
DL-2060 Digital Multimeter
-
●Resolution: 6 1/2 digits.
●5*7 dot matrix VFD, dual displays with 3-color annunciators.
●12 standard measurement functions & 8 math functions.
●Stability, Accuracy and Speed (2000RDGS/Sec at 4 1/2 Digit, 50 RDGS/Sec at 6 1/2Digit in 60 Hz)
●Multi-Points Scanner Card: Up to 10 Channels. (Optional)
●Built-in USB and GPIB (VG type only) Interfaces.
●Easy & Free PC applications.
-
Scanner Box
-
Scanner Box for STW Series
-
•8 HV outputs (STW-S1)
•6 HV outputs /2 GB outputs (STW-S2)
•ACW: 5kV AC
•DCW: 6kV DC
•IR:1kV DC
•GB: 40A (STW-S2 only)
•PASS/FAIL LEDs
•HI LO LEDs
•Up to 4 scanner boxes can be connected
•RS-232C interface(Connect to STW-9000 only)
-
AC/DC Power Source
-
Programmable AC/DC Power Source
-
Output Rating: AC 0 – 400 Vrms, DC 0 - ± 570 V
Output Frequency up to 999.9 Hz
DC Output (100% of Rated Power)
Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
Voltage and Current Harmonic Analysis(THDv, THDi)
Remote Sensing Capability
OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm
Support Arbitrary Waveform Function
Output Capacity: 2kVA/ 3kVA/4kVA
Customized Phase Angle for Output On/Off
Sequence and Simulation Function(up to 10 sets)
Interface(std): USB, LAN, RS-232C, GP-IB
Built-in External Control I/O and External Signal Input
Built-in Output Relay Control
Memory Function (up to 10 sets)
Built-in Web Server
-
-
Programmable AC/DC Power Source
-
Output Rating: AC 0 – 350 Vrms, DC 0 - ± 500 V
Output Frequency up to 999.9 Hz
DC Output (100% of Rated Power)
Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
Voltage and Current Harmonic Analysis(THDv, THDi)
Remote Sensing Capability
OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
Support Arbitrary Waveform Function
Output Capacity: 500VA/ 1000VA
Customized Phase Angle for Output On/Off
Sequence and Simulation Function(up to 10 sets)
Interface: USB, LAN, RS-232C(std.); GP-IB(opt.)
Built-in External Control I/O and External Signal Input
Built-in Output Relay Control
Memory Function (up to 10 sets)
Built-in Web Server
-
Multi Function Dropper Type
-
Multifunctional DC regulated power supply
-
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
● Equipped with electronic load function (CH1, CH2 / CC, CV, CR mode)
● Low noise/low ripple: ≦350μVrms/≦2mArms (for PDW32-3DG)
● Series/parallel tracking function (CH1-CH2)
● Output delay/output monitoring/output record function
● Protection function: OVP/OCP/OTP/OPP (when loading)
● Sequence function (CH1/CH2)
● Internal memory function (panel settings/sequence/output delay/output record)
● Power output from USB power supply port (3CH model)
● Remote sensing function (1CH model, 3CH model except PDW32-3TG)
● 4.3 inch color TFT LCD
● Standard interface: USB, RS-232C, GP-IB, LAN, external I/O
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
● Equipped with electronic load function (CH1, CH2 / CC, CV, CR mode)
● Low noise/low ripple: ≦350μVrms/≦2mArms (for PDW32-3DG)
● Series/parallel tracking function (CH1-CH2)
● Output delay/output monitoring/output record function
● Protection function: OVP/OCP/OTP/OPP (when loading)
● Sequence function (CH1/CH2)
● Internal memory function (panel settings/sequence/output delay/output record)
● Power output from USB power supply port (3CH model)
● Remote sensing function (1CH model, 3CH model except PDW32-3TG)
● 4.3 inch color TFT LCD
● Standard interface: USB, RS-232C, GP-IB, LAN, external I/O
● High resolution: Setting 1mV/0.1mA, Reading 0.1mV/0.1mA
-
-
PPX Series High-precision DC Power Supply
-
CV, CC priority start function.
Four levels of current measurement resolution (min. 0.1μA) / two levels of voltage measurement resolution (min. 0.1mV)
Power output ON/OFF delay function
Adjustable voltage and current slew rate
Bleeder circuit control
Delayed over-current protection(OCP Delay)
Sequential power output function
Remote Sensing function
Data Logger
10 sets of memory function
Over voltage protection, under voltage limit, over current protection, over temperature protection, AC alarm function
Supports K Type thermocouple temperature measurement
Interfaces: USB, LAN, RS-232, RS-485, Analog Control; Opt: GP-IB
Size: 3U high, in line with 1/4 Rack
-
Multi Function Switching Type
-
PSW-M Multi-output wide range DC power supply
-
High performance/power
⚫Power efficient switching type power supply
⚫Low impact on load devices
⚫Fast transient recovery time of 1ms
⚫Fast output response time
Features
⚫OVP, OCP, OHP (OTP) and tUVP protection
⚫Adjustable voltage and current slew rates
⚫Operates in three modes: CV, CC, CP
⚫Equipped with a bleeder circuit that can be controlled on/off
⚫Extensive remote monitoring and control options
⚫Equipped with data logger function
⚫Supports test mode
⚫Supports operation from a web server
Interface
⚫Ethernet port
⚫Analog connector for analog voltage and current monitoring
⚫USB host and device port
-
-
PSW-A Series Power Supply
-
●Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W to 1080W
●Constant Power Output for Multiple Range (V&I) Operation
●CV/CC Priority; Particularly Suitable for the Battery and LED Industry
●Adjustable Slew Rate
●Series Operation: Up to 2 units (30V, 80V, 160V models only)
●Parallel Operation: Up to 3 units
●High Efficiency and High Power Density
●1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
●Standard Interface: LAN,USB,Analog Control Interface
●Optional Interface: GPIB-USB Adaptor, RS-232C-USB Adaptor
-
-
PFR-100 Series
-
●Constant Power Output for 5 Times Multi-range(V&I) Operation
●Natural Convection Cooling Design (Fanless Structure)
●Output ON/OFF Delay Function
●CV, CC Priority Mode
●Adjustable Slew Rate For Voltage and Current
●Bleeder Circuit Control
●Protections: OVP, OCP, AC FAIL and OTP
●Test mode function (Max 100steps sequence)
●Built-in USB and RS-232/485 Interface
●Built-in LAN and GPIB Interface (G Type)
-
-
PSF-H Series High voltage Flexible range Regulated DC Power Supplies
-
● Main Applications
High-voltage capacitors or relays used for hybrid cars, electric cars, solar power system and high-voltage LED lighting equipment.
● 6 times of flexible output range
PSF-800H covers output for several units of conventional type regulated power supplies within 800W ( max voltage 800V, max current 6A. ).
● Constant Power Control
CP mode is available in addition to CV and CC modes.
● Changeable setting style
Vertical or horizontal setting by 90°rotating panel.
● Sequence Operation
Stand-alone sequence is available with the insidememory programmed by PC, through the optional control board (IF-60GP, IF-60RU).
● Master-slave parallel operation
Possible to increase the output current by master-slave parallel connection of the same model (up to 2 units).
● Various functions are available
Output OFF timer, 3-point preset memory, Remote sensing, External analog control, OVP/OCP/OHP protections
-
-
PSF-L Series Flexible range Regulated DC Power Supplies
-
● Flexible output range
Possible to output voltage and current fexibly within the rating power.
In case of PSF-800L, 10V/80A to 80V/10A, 20V/40A to 40V/20A, etc. are available corresponding to plural number of conventional regulated DC power supplies.
● Sequence function
Stand alone sequence operation is possible sending the sequence made with PC to the unit through optional IF-60GP or IF-60RU interface board.
● Control of constant power
In addition to constant voltage(CV) and constant current(CC), constant power(CP) is also available for use of supplying arbitrary power or as limit function to protect being added over power to load side.
● External control
Output voltage and current can be set through external voltage or external resister, and to control output on/o by external contact signal.
●Parallel/series operation
Including master unit, 4 units in parallel and 2 units in series connection can be controlled by one master unit.
Current expansion model(exclusive slave unit) in parallel connection is available
● Others
Off timer function
3-point preset function
Monitor out function (voltage,current and status)
Protection function
Delay function (PSF-400L2 only)
Tracking function (PSF-400L2 only)
-
-
PS-A / PS-AR Series Regulated DC Power Supplies
-
● Four digits LED display
The high resolution display can indicate output voltage and current and power value. Voltage and current values can be easy to set with "digit key" by selecting a digit to be changed.
● Three points preset memory function
Possible to preset three kinds of voltage and current values inside for easy reading of setting values.
● HI-R Function
This function is useful for not to discharge secondary cell, not to ungild plating and so on.
● Off timer function
Possible to turn off output automatically after a lapse of preset time.
● Controlling transient build-up current function
This function enables to control current at output on and prevents current overshoot.
● Sequence function
Stand-alone sequence operation is possible by loading maximum 1000 steps sequence program from PC into the unit through optional IF-70GU or IF-70RS interface board.
● Master slave operation
This function enable to operate plural same units in parallel up to 2400W (up to 800W for 6V series) and in series for two units.
● External analog control (PS-A type only)
The PS-A series can be controlled by external voltage or resistance for setting voltage and current values and by external contact for turning on/off output and selecting preset memory. PS-AR type dose not accommodate external analog control.
● Optional remote control interface boards
IF-70GU (GP-IB and USB), IF-71RS (RS-232C) and IF-70PS (compatible with PS series) are available.
● RS-232C standard PS-AR type
PS-AR type is included RS-232C control board. PS-AR type can connect max. 32 units and be controlled by PC. Simple and low-cost system can be provided.
-
Accessories
Accessories
Software
Software
Discontinued:other
-
LSA Series DC Electronic Loads
-
●Compact size which is 1/3-rack-size for 165W model and 330W model. Reduce the bulk ratio to 60% of that of the conventional company products.
●Full-color 3.5 inch LCD provides high operability and visibility.
●10μA minimum resolution for current setting (LSA-165 L range).
●CC/CR/CP/CC+CV/CR+CV mode are selectable.
●High-speed response for 10μsec. Switching function is available (CC, CR, CP mode).
●External voltage / resistance control function is available.
●Maximum 5-unit-parallel master-slave operation is available.
●Sequence control provides branch on condition.
●Option: GP-IB, USB and RS-232C are in one slot-in option board IF-80GUR.Recommend to use GP-IB or RS-232C if you use LSA series at noisy condition.
-
-
FGX-295 50MHz Arbitrary Function Generator
-
● Output range up to 50MHz for sine waveform and 25MHz for square waveform.
● 5 standard waveform: Sine, Square, Ramp, Pulse and Noise
● Arbitrary waveform function with 14bits, 125Mega sampling per sec.
● Flexible frequency sweep, burst waveform and modulation (AM, FM, PM, FSK and PWM) function.
● Standard equipment of USB(USB-TMC), LAN(LXI) and GP-IB
● Standard equipment of a useful PC application (WAVEPATT)
● Memorizes up to 4kinds of an arbitrary waveform with 256 points.
-
-
CG-971 Color pattern Generator
-
● Analog video signal/Audio signal output
● Conformity with NTSC,PAL,PAL-M and TNSC-4.43
● Selectable sync level
● Available for various and output patterns by system file
● Each staircase level in step pattern settable by voltage
● Natural image and Monoscope pattern output
● Max. 24 pattern installation
● Auto sequence mode
● GP-IB, RS-232C, and Digital IF (TTL) for remote control
● Half rack size of 19 inch EIA 2U
-
-
DL-2140 4 1/2 Digital Multimeter
-
Specification Conditions: Temperature: 23˚C±5˚C
Humidity: < 80%RH, 75%RH for resistance measurement readings greater than 10MΩ.Operating Environment:
(0~50˚C)Temperature Range: 0~35˚C, Relative Humidity: < 80%RH;
> 35˚C, Relative Humidity: < 70%RH
Indoor use only, Altitude: 2000 meters , Pollution degree 2Storage Conditions
(-10~70˚C)Temperature Range: 0~35˚C, Relative Humidity: < 90%RH;
> 35˚C, Relative Humidity: < 80%RHGeneral: Power Consumption: Max 15VA AC100V – 240V ±10%,50/60Hz
Dimensions: 265 mm (W) X 107 mm (H) X 302 mm (D)
Weight: Approximately 2.9 kgAccessories Accessories CD-ROMx1, Test leadsx1 ,Power cordx1
-
-
RA-920B Resistance Attenuator
-
● Attenuation range 0 to 121dB (0.1dB steps)
● Frequency range DC to 1MHz
● Input/output impedance 600Ω±10Ω
-
-
PSW Series Power Supply
-
●Voltage Rating: 30V/80V/160V/250V/800V, Output Power Rating: 360W to 1080W
●Constant Power Output for Multiple Range (V&I) Operation
●CV/CC Priority; Particularly Suitable for the Battery and LED Industry
●Adjustable Slew Rate
●Series Operation: Up to 2 units (30V, 80V, 160V models only)
●Parallel Operation: Up to 3 units
●High Efficiency and High Power Density
●1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
●Standard Interface: LAN,USB,Analog Control Interface
●Optional Interface: GPIB-USB Adaptor, RS-232C-USB Adaptor
-
-
PDS-A Series Hybrid (Switching and Dropper) method Regulated DC Power Supplies
-
● Satisfying CE Mark Certification Requirements
● Series/Parallel Operation
● 3-points Voltage/Current Preset
● Various Protection Functions
● Off timer function
● Controlling transient build-up current function
● Sequence function
● External analog control function
-
-
PR-A Analog Meter
-
● Low-noise/low-ripple
● Floating output
● CV/CC power supply
● Master-slave parallel-connected operation function
-
-
PAR-A Series Regulated DC Power Supplies
-
● 18V/6A Model and 36V/3A Model
● Remote sensing
● CV/CC power supply
● Rack-mount size
● Key Lock
● External Input Control (Output, Preset)
● GP-IB, USB, RS-232C Option Interface
GP-IB/USB interface(IF-41GU), USB interface(IF-41USB) and RS-232C(IF-41RS) provided as user option.
-
-
STW-9800 Series Electrical Safety Testers
-
● 200VA AC Test Capacity
● 240 x 64 Ice Blue Dot Matrix LCD
● Manual/Auto Mode
● Function Key for Quick Selecting
● High Intensity Flash for Caution & Status Indication
● Safety Interlock Function
● True RMS Current Measurement
● High Resolution : 1μA for Measuring Current, 2V for Setting Voltage
● PWM Switching Amplifier to Enhance the Power Efficiency and Reliable Testing
● Max. 100 Memory Block for Test Condition (Step) Setting. And Each Step
can be Named Individually
● Remote Terminal on the Front Panel for“Start”and“Stop” Control by External
● Interface: RS-232C, USB Devise, Signal I/O and GP-IB (Option: OPT.1)
-
-
STW-9900 Series Electrical Safety Testers
-
● 500VA AC Test Capacity
● 240 x 64 Ice Blue Dot Matrix LCD
● Manual/Auto Mode
● Function Key for Quick Selecting
● High Intensity Flash for Caution & Status Indication
● Safety Interlock Function
● Zero Crossing Turn-on Operation
● Zero Crossing Turn-on Operation
● True RMS Current Measurement
● High Resolution : 1μA for Measuring Current, 2V for Setting Voltage
● PWM Switching Amplifier to Enhance the Power Efficiency and Reliable Testing
● Max. 100 Memory Block for Test Condition (Step) Setting. And Each Step can be Named Individually
● Remote Terminal on the Front Panel for“Start”and“Stop” Control by External
● Interface: RS-232C, USB Devise, Signal I/O and GP-IB (Option: OPT.1)
-
Discontinued Gennerators
-
FG-274 Function Generator
-
● Output Waveforms of Sine, Square, Triangle and Pulse.
● The design of DDS and FPGA technology provide high quality waveforms.
● High frequency stability and accuracy: 20ppm.
● Low Distortion at -55dBc.
● Wide output frequency range: 4MHz
● Maximum frequency resolution of full range: 100mHz.
● TTL/CMOS output
● Variable DC offset control
● Variable Duty ratio control
● Output overload protection
● Store/Recall function
-
-
FG-281 Function Generator
-
● Generates Sine, Triangle, Square, Pulse, Ramp wave, and DC.
● Wide band output from 0.01Hz to 15MHz (Sine, Square wave).
● ±50ppm High Frequency Accuracy with Direct Digital Synthesizer.
● Amplitude and Frequency display with Vacuum Fluorescent
● Ten-key setting for amplitude and frequency, and continuouslyswitch waveforms.
● 0.1% step and 0 to 100% Duty control (Pulse and Ramp wave).
● +10V to -10V Offset control (Open circuit).
● Linear and Log sweep functions, and Burst function.
● Full remote control with GP-IB and RS-232C as standard.
● 9-point Presetting function
● Pulse Motor Control function by factory option at shipment.
-
-
FGX-2005/FGX-2112 Arbitrary Function Generator
-
● 0.1Hz ~ 5/12 MHz with in 0.1Hz Resolution
● Sine, Square, Ramp, Noise and Arbitrary Waveform
● 20MSa/s Sampling Rate, 10 bit Vertical Resolution and 4k point Memory for Arbitrary Waveform
● 1% ~ 99% Adjustable Duty Cycle for Square Waveform
● Waveform Parameter Setting Through Numeric Keypad Entry & Knob Selection
● Amplitude, DC Offset and Other Key Setting Information Shown on the 3.5” LCD Screen Simultaneously
● AM/FM/FSK Modulation, Sweep, and Frequency Counter Functions (FGX-2112 only)
-
Discontinued Oscilloscope
-
DCS-4605 250MS/s Digital Storage Oscilloscope
-
● Automatic measurement functions 19 kind
● 250MS/s Sampling
● Various trigger functions Edge trigger, Video trigger and Pulse trigger functions are available.
● An "educational mode" function can be used in order to prevent a student from using an automatic calculation function.
● Application software; FreeWave
● Go-NoGo function
● Data logger function
● USB host /USB Device(Not support via usb3.0 or above)
-
-
DCS-7500A Series 1GS/s Digital Storage Oscilloscop
-
● Automatic measurement functions 27 kind
● 1GS/s Sampling
● Various trigger functions Edge trigger, Video trigger and Pulse trigger functions are available.
● An "educational mode" function can be used in order to prevent a student from using an automatic calculation function.
● Application software; FreeWave
● Go-NoGo function
● Data logger function
-
-
DCS-9700 Series
-
● 300/200/100/70MHz Bandwidth, 2 or 4 Input Channels
● 2GSa/s Maximum Real-Time Sampling Rate and 100GSa/s Equivalent Time Sampling Rate
● 2Mpoints Maximum Record length
● Fastest Update Rate of 80,000 Waveform Per Second
● Segmented Memory Acquisition and Waveform Search Function
● Optional Function Generator
● Flexible Remote Control Connectivity (Standard : USB ; Optional : LAN/ GPIB)
● Optional 8 or 16 Additional Digital Channels with Logic Analyzer (MSO) & Serial Bus I2C/SPI/UART Trigger and Decode Software
-
Digest Catalog
Contact
How to Buy
FAQ